Siemens SPS starter kit 6ED1057-3BA10-0AA8 6ED1057-3BA10-0AA8 Fiche De Données
Codes de produits
6ED1057-3BA10-0AA8
Tutorial
3.4 Getting started with project creation
LOGO!Soft Comfort Online Help
Operating Instructions, 06/2014
Operating Instructions, 06/2014
161
3.4.3.2
Configuring Ethernet connection, LOGO! to remote devices
Creating remote connections
If you added network blocks to communicate with remote devices, you can configure
connections as follows:
1. Right click the function block and set the block properties of this block.
1. Right click the function block and set the block properties of this block.
2. Define the device to connect as a remote device.
3. Choose the device name and IP address of the target device.
3. Choose the device name and IP address of the target device.
Alternatively, you can also browse for a device configured previously.
LOGO!Soft Comfort supports to configure your local device to the following remote devices
on the listed block types and their value range.
For NI and NAI:
For NI and NAI: