Buffalo TeraStation 1200 TS1200D0202-EU Fiche De Données
Codes de produits
TS1200D0202-EU
85
Browse Shares
Shows a list of shared folders on the selected NAS device.
Exit
Exits NAS Navigator2.
*"I'm here" is only available on TS1400D models. When clicked, the TeraStation will beep and its power LED will blink
red.
The following tasks may be performed from the TeraStation's properties page.
red.
The following tasks may be performed from the TeraStation's properties page.
Name
Description
Configuration
Click Settings to open the configuration interface.
IP Address
Check Use DHCP to assign an IP address from the DHCP
server automatically. If there is no DHCP server on the
network, you cannot use this function. Check Renew IP
address to obtain an IP address from the DHCP server.
Uncheck Use DHCP and enter an IP address, subnet mask,
and default gateway to manually configure them.
server automatically. If there is no DHCP server on the
network, you cannot use this function. Check Renew IP
address to obtain an IP address from the DHCP server.
Uncheck Use DHCP and enter an IP address, subnet mask,
and default gateway to manually configure them.
Mount as Network Drive
You can easily map a shared folder as a network drive using NAS Navigator2.
1
Double-click the
icon to start NAS Navigator2.
2
Right-click on the TeraStation's icon, then click Map Share.
3
An icon for the mapped share will appear in Computer or My Computer. You can use this network drive just like