Buffalo TeraStation 1200 TS1200D0202-EU Fiche De Données
Codes de produits
TS1200D0202-EU
91
Chapter 10 Appendix
When the Power LED Blinks
No Color
The power LED will blink during bootup or shutdown.
Red
If there is an error, the power LED will blink red. For TS1200D models, the following blink patterns will give the error
code. You can also see any errors in NAS Navigator2.
code. You can also see any errors in NAS Navigator2.
Place of Error Code
Status
10s Place of Error Code
The LED flashes for 1.0 second every 0.3 seconds. This gives the tens place
of the error code.
of the error code.
1s Place of Error Code
The LED flashes for 0.5 seconds every 0.3 seconds. This gives the ones
place of the error code.
place of the error code.
Error Code
Description
Corrective Action
E10
The TeraStation is running on the UPS
battery due to a power outage. The
system will now be shut down safely.
battery due to a power outage. The
system will now be shut down safely.
Check that power is being supplied to
the UPS, and if there are no problems,
turn on the TeraStation.
the UPS, and if there are no problems,
turn on the TeraStation.
E11
An error occurred in the fan speed.
Check the fan. Use compressed air or
tweezers to remove any dust or foreign
objects. Confirm that the fan is spinning
normally. If it is not, contact Buffalo
technical support for assistance.
tweezers to remove any dust or foreign
objects. Confirm that the fan is spinning
normally. If it is not, contact Buffalo
technical support for assistance.
E12
The system is overheating.
Do not place objects in the area
around the TeraStation. Also, move the
TeraStation to a cool location.
around the TeraStation. Also, move the
TeraStation to a cool location.
E13
An error occurred in the RAID array. The
TeraStation is in degraded mode.
TeraStation is in degraded mode.
Replace the defective drive. Reboot the
TeraStation and rebuild the RAID array.
TeraStation and rebuild the RAID array.
E14
RAID array x cannot be mounted.
Run the RAID array disk check in
Settings.
Settings.
E15
The bad sectors have reached a
dangerous level.
dangerous level.
Replace the defective drive.
E16
Unable to find hard drive x.
Hard drive x may be disconnected
or may have failed. Shut down the
TeraStation and reinstall the hard drive.
or may have failed. Shut down the
TeraStation and reinstall the hard drive.
E22
Mounting of hard drive x failed.
Format the hard drive. After formatting,
if the error still appears after rebooting,
replace the hard drive. If the error
is displayed again, contact Buffalo
technical support for assistance.
if the error still appears after rebooting,
replace the hard drive. If the error
is displayed again, contact Buffalo
technical support for assistance.