Buffalo LinkStation 441D 16TB LS441D1604-EU Fiche De Données
Codes de produits
LS441D1604-EU
80
4
Tap Apply, then OK.
USB Device Server
The USB device server lets you use USB devices connected to the LinkStation with multiple computers.
1
Connect the USB device directly to your computer and install its drivers and software normally.
Dismount and remove the USB device when installation is complete.
Dismount and remove the USB device when installation is complete.
2
Connect the USB device to the LinkStation's USB port.
Note: With the USB device server enabled, you may connect a single USB hub to the LinkStation. Up to 15
USB devices may be connected to the hub. Don't connect more than one bus-powered drive at a time. Use a
separate AC power connection for each device if possible. Connecting more than one bus-powered device at a
time may damage both the LinkStation and the devices.
USB devices may be connected to the hub. Don't connect more than one bus-powered drive at a time. Use a
separate AC power connection for each device if possible. Connecting more than one bus-powered device at a
time may damage both the LinkStation and the devices.
3
In Advanced Settings, click File Sharing.
4
Click
to the right of "Folder Setup".
5
Select the USB device connected to the LinkStation.
Note: USB device server and DLNA are not compatible. Disable DLNA protocol support if using USB device
server.
server.
6
Move the USB device server switch to the
position to enable the USB device server.
You can also enable the USB device server from Easy Admin.
Note: When the USB device server is enabled, other functions that use the USB port won't be available.
7
To install Network-USB Navigator, click USB Device Server in Easy Admin or navigate to Services - USB Device
Server - USB Device Server in Advanced Settings. You'll need administrator privileges to install the software.
Server - USB Device Server in Advanced Settings. You'll need administrator privileges to install the software.
Connecting with Network-USB Navigator
1
1
Launch Network-USB Navigator.
For Windows:
Navigate to (All) Programs - BUFFALO - Network-USB Server, then click Network-USB Navigator. On Windows 8.1
or Windows 8, click Network-USB Navigator from the Start screen.
For Mac:
Navigate to Macintosh HD - Applications - BUFFALO - Device Server - Network-USB Navigator.
For Windows:
Navigate to (All) Programs - BUFFALO - Network-USB Server, then click Network-USB Navigator. On Windows 8.1
or Windows 8, click Network-USB Navigator from the Start screen.
For Mac:
Navigate to Macintosh HD - Applications - BUFFALO - Device Server - Network-USB Navigator.