Buffalo TeraStation 3400 16TB TS3400D1604 Fiche De Données
Codes de produits
TS3400D1604
36
1
Select RAID.
2
Click the array to delete.
Note: If the “RAID Mode” field is blank, the array is already in JBOD mode. Proceed to step 7.
3
Click Delete RAID Array.
4
The “Confirm Operation” screen will open. Enter the displayed number, then click OK.
5
Click OK.
6
Choose the array to configure.
7
Select a RAID mode and the drives to be used, then click Create RAID Array.
8
Step through the wizard to create the array.
Notes:
• You can also configure RAID settings from Easy Admin.
• After changing the RAID mode, create a shared folder.
• You can also configure RAID settings from Easy Admin.
• After changing the RAID mode, create a shared folder.
Configuring a Hot Spare
If you have a hot spare configured and an array fails, the TeraStation immediately switches over to the hot spare. To use
a hot spare, you need an extra drive that’s not part of any array and a RAID 1 or RAID 5 array.
a hot spare, you need an extra drive that’s not part of any array and a RAID 1 or RAID 5 array.