Buffalo NAS server 16 TB TeraStation 5400 Rack WD Red TS5400RWR1604-EU TS5400RWR1604-EU Fiche De Données
![Buffalo](https://files.manualsbrain.com/attachments/9b1b53b017a12138833f39c4f8c1f2aa34c2c16e/common/fit/150/50/266e1b8b2619927602ffd298e5482e1aaec72f4e72045ee85919e6306019/brand_logo.png)
Codes de produits
TS5400RWR1604-EU
75
4
Click Add, enter the IP address of the target LinkStation or TeraStation, and click Close.
If your setup meets the requirements below, you don’t have to configure these settings:
• The source and target TeraStations are on the same network.
• No backup password is set for the target TeraStation.
• No TeraStation from outside the subnet, or connected by a VPN, is used.
• The source and target TeraStations are on the same network.
• No backup password is set for the target TeraStation.
• No TeraStation from outside the subnet, or connected by a VPN, is used.
Notes:
• To back up data between LinkStations or TeraStations on a network using jumbo frames, make sure that both de-
• To back up data between LinkStations or TeraStations on a network using jumbo frames, make sure that both de-
vices are configured to use identical (or similar) Ethernet frame sizes. If Ethernet frame sizes are significantly dif-
ferent, the backup job may not be properly performed. In such a case, select the default frame size (1518 bytes).
ferent, the backup job may not be properly performed. In such a case, select the default frame size (1518 bytes).
• You can also specify hostname by a fully qualified domain name (FQDN).
Configuring a Backup Job
1
1
In Settings, click Backup.