TP-LINK JetStream TL-SG3216 TL-SG3216 Fiche De Données
Codes de produits
TL-SG3216
server. To delete the allocated IP from DHCPv6 server and disable the DHCPv6
Client function, please use
Client function, please use
no ipv6 address dhcp command.
Syntax
ipv6 address dhcp
no ipv6 address dhcp
Configuration Mode
Interface Configuration Mode (interface vlan)
Example
Enable the DHCP Client function when the management VLAN of the switch is
VLAN1:
VLAN1:
TL-SG3424(config)# interface vlan 1
TL-SG3424(config-if)# ipv6 address dhcp
ipv6 address ra
Description
This command is used to configure the switch’s global IPv6 address according to
the address prefix and other configuration parameters from its received
RA(Router Advertisement) message. To disable this function, please use
the address prefix and other configuration parameters from its received
RA(Router Advertisement) message. To disable this function, please use
no
ipv6 address ra command.
Syntax
ipv6 address ra
no ipv6 address ra
Configuration Mode
Interface Configuration Mode (interface vlan)
Example
Enable the automatic ipv6 address configuration function to obtain IPv6 address
through the RA message when the management VLAN of the switch is VLAN1:
through the RA message when the management VLAN of the switch is VLAN1:
TL-SG3424(config)# interface vlan 1
TL-SG3424(config-if)# ipv6 address ra
129