TP-LINK 16-Port Gigabit Desktop/Rackmount Switch TL-SG1016D Fiche De Données

 

2 

detect and correct problems on the network. 

¾

 Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab 

standards 

¾

  16/24 10/100/1000Mbps Auto-Sense RJ45 ports supporting 

Auto-MDI/MDIX 

¾

  All ports Support Full/Half Duplex transfer mode for 

10/100Mbps and Full Duplex transfer mode for 1000Mbps 

¾

 Supports 

IEEE802.3x 

flow control for full-duplex mode and 

backpressure for half-duplex transfer mode 

¾

  Non-blocking switching architecture that forwards and filters 

packets at full wire-speed for maximum throughput 

¾

  Supports MAC address auto-learning and auto-aging 

¾

  LED indicators for monitoring power, link, speed and activity 

¾

 Rack-mountable 

steel 

case 

¾

  Internal power supply 

Before place the Switch on a desk, attach four rubber footpads 
to the flutes on the Switch bottom, then lay the Switch on the 
desktop, where can be have as much as 5kg placed on top. 
Note: 
1.  The electrical outlet shall be installed near the device and 

shall be easily accessible. 

2.  Make sure there is free space for radiating heat and air. 
3.  Make sure not to place anything too heavy on top of the switch.