C&E L750 Desk Lamp 50 LEDs Metal, Silver L750 Fiche De Données

The product is for illumination. Several LEDs generate warm light with daylight characteristics. Use 

only the power adapter provided to operate the lamp. Operate the product in dry interior spaces only.

For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you 

use the product for purposes other than those described above, the product may be damaged. In 

addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. Read 

the instructions carefully and keep them. Make this product available to third parties only together 

with its operating instructions. 

The F-icon indicates that the product is can be mounted directly on surfaces with a 

normal degree of flammability.

The device is only authorised for use in dry, sheltered environments.

LED table lamp

• 

Power adapter

• 

Operating instructions

• 

The device is not a toy. Keep it out of the reach of children and pets.

• 

Do  not  leave  packaging  material  lying  around  carelessly.  These  may  become  dangerous 

• 

playing material for children.

Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, 

• 

moisture, flammable gases, vapours and solvents.

Do not place the product under any mechanical stress.

• 

If it is no longer possible to operate the product safely, take it out of operation and protect it 

• 

from any accidental use. Safe operation can no longer be guaranteed if the product:

is visibly damaged, 

 -

is no longer working properly, 

 -

has been stored for extended periods in poor ambient conditions or 

 -

has been subjected to any serious transport-related stresses.

 -

Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage 

• 

the product.

Also observe the safety and operating instructions of any other devices which are connected 

• 

to the product.

The product should not be connected immediately after it has been brought from an area of cold 

• 

temperature to an area of warm temperature. Condensed water might destroy the product. Wait 

until the product stabilising to adapt to the new ambient temperature before use.

Never  stare  directly  into  the  light  source,  add  never  point  he  light  beam  directly  towards 

• 

humans or animals.

Never touch the power unit with wet or damp hands. There is a risk of a fatal electric shock.

• 

Consult an expert when in doubt about operation, safety or connection of the device.

• 

Maintenance, modifications and repairs are to be performed exclusively by an expert or at a 

• 

qualified shop.

If you have questions which remain unanswered by these operating instructions, contact our 

• 

technical support service or other technical personnel.

Remove all packaging materials. Check whether there is any damage to the product.

1. 

Place the product on a stable surface.

2. 

Make sure the lamp is switched off.

3. 

Connect the power adapter to the lamp and a socket.

4. 

The lamp is now ready for operation.

5. 

Turn the lamp on with the ON/OFF switch.

6. 

Set the direction of the light and the illumination level of objects or room according to your 

7. 

wishes.

The LED module cannot be replaced.

Before cleaning, disconnect the device from the mains power.

• 

Use a dry and lint-free cloth to clean the product. For stronger contamination, use a cloth that 

• 

is slightly moistened with lukewarm water.

Electronic devices are recyclable waste and must not be disposed of in the household 

waste.

At the end of its service life, dispose of the product according to the relevant statutory 

regulations.

Operating voltage:

15 V/DC

Current consumption:

350 mA

Power consumption:

5.25 W

Operating temperature: 0 to +45 ºC

Dimensions (W x H x D): 180 x 995 x 250 mm

Weight:

approx. 1.9 kg

Input voltage:

100 – 240 V/AC, 50/60 Hz

Input current:

500 mA

Output voltage:

15 V/DC

Output current:

350 mA

Plug Ø:

2.0 mm (inner) / 5.4 mm (outer)

Cable length:

approx. 180 cm

These operating instructions are published by Conrad Electronic SE,

Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.

All rights including translation reserved. Reproduction by any method, e.g. 

photocopy, microfilming, or the capture in electronic data processing systems 

require the prior written approval by the editor. Reprinting, also in part, is prohibited.

The operating instructions reflect the current technical specifications at time of print. 

We reserve the right to change the technical or physical specifications.

V3_1011_02-SB