Jj Joujye NU-0528e-B Mini-ITX Computer Case 2x USB, 1x Line-In, 1x Line-Out External Slots 1 Internal Slots NU-0528i-CR Fiche De Données

Codes de produits

NU-0528i-CR

ECE0528i/ECE0548i Mini-ITX Chassis

STANDARD ASSEMBLY

1. Before assembly, -

Dismantle the Plastic Slim ODD Cover from the Front Panel,

Remove the Slim ODD+2.5” Bay (Or 3.5" HDD Bay) and the

Center Bar from the Main Chassis Frame.

2. To install the bigger size FSP170-60SI/FSP220-6PLA

Power Supply, -

Break off and remove the excess

‘Punched-but-not-perforated’ Bracket on the Rear Panel

so that the Opening on the Rear Panel matches to the size

of the Power Supply.

(3) Place the Power Supply inside the case and, -

Use 3 pcs of 6-32*L6 Hexagon Head Screw to secure the

Power Supply from the Rear Panel.

(4) Use 4 pcs of 6-32*L6 Hexagon Head Screws to install

and secure the Motherboard.

If Low Profile Expansion Card is required, -

Unscrew and remove the Card Holder Bracket on the Rear

Panel,

Break off and remove the ‘Punched-but-not-perforated’

Low Profile Slot Cover on the Rear Panel.