be quiet! Pure Power L8 CM 630W BN182 Manuel D’Utilisation

Codes de produits
BN182
Page de 48
15
B. Check  whether  all  connections  are  correctly  connected  and  make  any
adjustments required, such as incorrect polarity.
C. Examine the connection of the on/off switch from the case to the motherboard.
Have the motherboard manual on hand if needed! Switch the power supply on by 
turning the switch to position „I“ and press the on/off switch on the case. If the
power supply still does not turn on, continue to the next item.
D. Check your system for possible short circuits or faulty hardware, making sure
you  switch  off  the  computer  and  disconnect  all  devices  not  required  for  the
computer to start. Switch it on again. Repeat this process and switch on one 
of the devices you have found likely to be faulty upon each restart. If the power
supply does not react due to a short circuit, wait at least 5 minutes after the 
restart as the device is equipped with over power protection.
Important:
If  the  power  supply  does  not  work,  check  that  you  have  read  these  instruction
thoroughly and have excluded the problems mentioned. If the problem persists, 
contact our customer service department immediately.
All returns are examined by our RMA service. If a power supply is found to be 
faultless, it shall be returned to the customer. A testing fee may be charged for the 
expense incurred.
7.  ATTACHEmENTS
This tem is delivered with: Power cables, operating instructions, cable ties, and
screws to attach power supply.
8.  DISPOSAL INSTRUCTIONS
Used electronic equipment may no longer be disposed of in unsorted household 
waste pursuant to European guidelines*. These must be disposed of separately.
Waste electronic and electric equipment must be transferred to a special collection 
point (e.g. recycling centre). This is usually free.