C&E LED outdoor floodlight (+ motion detector) 30 W Cold white 9281c3 Black 9281c3 Fiche De Données

The product is intended to provide outdoor lighting. The built-in PIR motion detector responds 

to temperature changes within the detection range (e.g. if a person enters the detection range) 

and activates the LED floodlight for an adjustable  period of time.
The safety instructions must be observed at all times!
Any use other than that described above could lead to damage to this product and involves 

the risk of short circuits, fire, electric shock, etc. No part of the product may be modified or 

converted!
This product complies with the applicable national and European requirements. All names of 

companies and products are the trademarks of the respective owners. All rights reserved.

•  LED floodlight with motion detector
•  Operating instructions

   This symbol indicates a health hazard, e.g. electric shock.

   The icon with an exclamation mark indicates particular hazards associated with han-

dling, function or operation. 

  The “Hand” symbol indicates special tips and operating information.

   Defective safety glass must be replaced immediately; if the safety glass 

is defective, the product must not be used.

  The product cannot be dimmed.

  Observe the operating instructions!

yourself but entrust the work to a qualified electrician. 

 

•  Unauthorised  conversion  and/or  modification  of  the  product  is  not  allowed  for 

safety and approval reasons (CE).

 

•  The product is not a toy and does not belong in the hands of children. There is 

danger of a life-threatening electric shock!

 

•  If it can be assumed that safe operation is no longer possible, the device must be 

turned off (take out corresponding fuse or switch off automatic cut-out; switch off 

corresponding ground fault circuit interrupter) and precautions are to be taken to 

ensure that it is not used unintentionally. After this, arrange for an expert to check 

the product.

    Safe operation can no longer be assumed if:

 

  -  the product shows visible signs of damage

 

  -   the product does not work at all or works poorly (where there is flickering light, 

leaking smoke or a smell of burning, audible crackling noises, or discolouration 

of the product or to adjacent surfaces)

 

  -  the product was stored under unfavourable conditions

 

  -  it was exposed to heavy loads during transport

 

•  Never direct a jet of water (e.g. for cleaning) from a garden hose or high-pressure 

cleaner, or similar source, onto the product!

 

• Caution, LED light: 

 

  Do not look directly into the LED light!

 

  Do not look into the beam directly or with optical instruments! 

 

•  In commercial institutions, the accident prevention regulations of the Employer’s 

Liability Insurance Association for Electrical Systems and Operating Facilities are 

to be observed.

 

•  Do not leave packaging material carelessly lying around, since it could become a 

dangerous plaything for children.

 

•   If you have any questions that are not answered in this manual, please contact our 

technical service or another specialist.

 

•  The product is protected according to IP44; it can be mounted and operated in 

indoor and outdoor areas. 

 

   The product is suitable for use outdoors; however, it must never be used in or 

under water! 

 

•  Do not use this product in rooms that are under adverse environmental conditions 

where combustible gases, vapours or dust are or may be present! There is a risk 

of explosion!

 

• Handle the product with care; it has sharp edges.

 

•  The product must not be exposed to extreme temperatures, strong vibrations or 

heavy mechanical stress.

 

•  When installing, make sure that the connecting cable is not bent, jammed or dam-

aged by sharp edges. 

 

•  Do not attach any items (e.g. decorations) to the product; there is a risk of fire!

 

•  The product may be operated only on the mains voltage (see section “Technical 

Data”). Never try to operate the device using any other voltage.

 

   During installation, all poles must be disconnected from the mains voltage (e.g. via 

RCD). 

 

•  The product is designed according to Protection Class I; the protective earth con-

ductor must be connected. 

 

   If there is not a mains supply provided with a protective earth conductor at the 

place of installation, the product must not be connected/used there. In this case, 

install a new voltage supply with a protective earth wire.

 

•  Connection is allowed only under zero voltage/current conditions. First switch off 

all poles of the mains supply by removing the fuse or switching off at the circuit 

breaker; then also switch off the associated residual current circuit breaker. Secure 

it against unauthorised reconnection, e.g. with a danger sign. 

 

   Afterwards check that the mains cable is voltage-free using a suitable tester before 

you carry out the connection.

 

• The product cannot be dimmed.

 

•  Make sure that all electrical connections and connection cables correspond to the 

regulations and to their operating instructions. 

G