Corsair 8 GB Memory Kit Q2X8G6400C4DHX Fascicule

Codes de produits
Q2X8G6400C4DHX
Page de 1
www.corsair.com 
The Q2X8G6400C4DHX is 8192MBytes of DDR2 SDRAM DIMMs built using Corsair’s latest high performance 
heat sink with Dual-Path Heat Xchange (DHX) technology.  This part delivers outstanding performance in the latest 
generation  of  dual-channel  DDR2-based  motherboards.  It  has  been  tested  extensively  in  multiple  DDR2 
motherboards to ensure compatibility and performance at its rated speed. This memory has been verified to operate 
at 800MHz at the low latencies of 4-4-4-12.   Corsair’s line of 8GB memory kits are designed for PCs featuring 64-bit 
operating systems.  Please note:  Installing 8GB onto PCs with 32-bit operating systems is not advised since 32-bit 
operating systems do not support 8GB of system memory.
Q2X8G6400C4DHX
Corsair’s line of 8GB memory kits are designed for PCs featuring 64-bit operating systems.  Corsair does not recommend installing 8GB onto PCs with 32-bit operating  
systems  –  this  configuration  is  not  advised  nor  supported.    Every  part  is  tested  in  Corsair's  factory  at  800MHz,  but  your  actual  results  may  vary  depending  on  the  
overclocking margin of your CPU and motherboard. Newer motherboards may be used for production test as they become available. Corsair may periodically update the  
part with newer RAM revisions of same or greater performance. RAM used on the module may change without notice. © September 2008 Corsair Memory, Inc. 
FEATURES 
 
  
8192 Megabytes of DDR2 memory
 
   Four matched CM2X2048-6400C4DHX modules
 
  
Designed for 64-bit operating systems 
 
   Unique DHX technology providing maximum cooling 
 
  
100% tested at 800MHz in high performance DDR2 
motherboards
 
   Lifetime warranty
TEST SPECS 
 
 
Each module set is tested together at 800MHz
 
  Tested and packaged together
  
Packaged together immediately following system 
test
 
 
Tested at low latency settings (4-4-4-12) at 
2.1V
 
 
SPD programmed at:
 
  
JEDEC standard 5-5-5-18 values at 800MHz
Dual-Path Heat Xchange Diagram
• Optimized fins to maximize ambient airflow through the module array
• Extruded aluminum heat sinks to maximize convective heat dissipation
• Dedicated PCB heat sink