Transcend 2GB DDR2 Overclocking Memory 240Pin Long-DIMM DDR2-1066+ Unbuffer Non-ECC 5-5-5-15 TX1066QLU-2GK Manuel D’Utilisation

 

 

Transcend Information Inc.

 

1

The TX1066QLU-2GK consists of 2pcs 1GB DDR2 

SDRAM module. The 1GB module is a 128M x 64bits 

DDR2-1066 Unbuffered DIMM. The 1GB module 

consists of 8 pcs 128Mx8bits DDR2 SDRAMs in 60 ball 

FBGA packages and a 2048 bits serial EEPROM on a 

240-pin printed circuit board. The 1GB module is a Dual 

In-Line Memory Module and is intended for mounting into 

240-pin edge connector sockets. 

Synchronous design allows precise cycle control with the 

use of system clock. Data I/O transactions are possible 

on both edges of DQS. Range of operation frequencies, 

programmable latencies allow the same device to be 

useful for a variety of high bandwidth, high performance 

memory system applications. 

 

•  RoHS compliant products   
•  Tested at SPD settings (5-5-5-15) at 2V at 1066MHz 
•  SPD programmed at: 

      JEDEC standard (5-5-5-18) at 800MHz 

      EPP standard (5-5-5-15) at 2V at 1066MHz 

•  Clock Freq: 533MHZ; 1066Mb/S/Pin. 
•  Posted CAS   
•  Programmable CAS Latency: 5 
•  Write Latency (WL) = Read Latency (RL)-1 
•  Burst Length: 4,8(Interleave/nibble sequential) 
•  Programmable sequential / Interleave Burst Mode 
•  Bi-directional Differential Data-Strobe (Single-ended   

 

     

data-strobe is an optional feature)         

•  Off-Chip Driver (OCD) Impedance Adjustment 
•  MRS cycle with address key programs. 
•  On Die Termination 
•  Serial presence detect with EEPROM 

L

A

C

H

J

I

K

B

G

D

E

F

M