Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Fiche De Données

*Set at the 3rd page of the throttle curve screen.

1. Select ACT and touch the RTN button.
2. Switch the display to ACT by scrolling the

touch sensor.

*The display blinks.
 INH: Inhibit
 ACT: Activate
3.  Enter  the  selection  by  touching  the  RTN

button.

1. Select SW and touch the RTN button.
2. The H/W SET screen is displayed. Select the

hardware and touch the RTN button.

This function limits the high range of the throttle 

movement by any slider or trimmer. 

*Control which adjusts the limit point during flight can be set.

1. Select HIGH and touch the RTN button.
2.  Adjust  the  high  side  operating  range  by

scrolling the touch sensor.

*A gauge is displayed at the left side of the graph.

3. Touch the RTN button to switch to the cursor

mode.

1. Select LOW and touch the RTN button.
2.  Adjust  the  low  side  operating  range  by

scrolling the touch sensor.

*A gauge is displayed at the left side of the graph.

3. Touch the RTN button to switch to the cursor

mode.

1. Select CTRL and touch the RTN button.
2. The H/W SET screen is displayed. Select the

hardware and touch the RTN button.

*The throttle limiter operating position is indicated by a 

dotted line on the graph.

*When limiter operating range adjustment control is NULL, 

the throttle limiter function is not performed.

1. Select CENTER and touch the RTN button for

1 second. CENTER changes from INH to “rate

display”.

2.  When  the  CENTER  rate  is  changed,  the

neutral position of the hardware set at CTRL

can be adjusted.

*When CENTER is INH, the neutral position becomes the 

LOW intermediate value.

*When CENTER is changed from INH to “rate display”, the 

CENTER rate is set to the LOW intermediate value.

*The CENTER rate can be set between HIGH and LOW.

[Throttle limiter setting]

When "CTRL" is set as a "RS" side slider. 

The state of full high of a throttle stick. 

RS Position

Throttle

Position

Full

Restriction

Restriction

Restriction

Slow

Full

Slow

Full

Slow

In "INH", the halfway

 point of "HIGH" and

 "LOW".

HIGH

LOW

CENTER