Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Fiche De Données
Codes de produits
1-F8075
23
<Before Use>
When exchanging for the LiFe battery
(FT2F2100B/FT2F1700B) of an option.
Attachment of the battery
Attachment of the battery
1. T14SG to HT5F1800B is removed.
2. A LiFe spacer (14SG attachment) is inserted
2. A LiFe spacer (14SG attachment) is inserted
as shown in a figure.
3. A LiFe battery (option) is inserted as shown in
a figure.
4 . 2 P c o n n e c t o r o f a L i F e b a t t e r y i s
connected.
5. Close the battery cover completely.
6 . T 1 4 S G i s t u r n e d o n a n d [ L I N K A G E
6 . T 1 4 S G i s t u r n e d o n a n d [ L I N K A G E
MENU]=>[WARNING]=>[LOW BATTERY] is
called.
7. It changes into 6.0V from 5.6V.
Charge of a LiFe battery
Note: LiFe battery cannot be charged with the
Note: LiFe battery cannot be charged with the
charger of 14SG attachment.
Be sure to remove a battery from T14SG and to
Be sure to remove a battery from T14SG and to
charge from the charger only for LiFe.
Warning
Follow the manual of a LiFe battery.
Don't charge the LiFe battery with the
NiMH charger of 14SG attachment.
* Be sure to remove from T14SG and to charge with
the charger only for LiFe.
Be sure to change the voltage of LOW
BATTERY WARNING into 6.0V from
5.6V
LiFe SPACER
LiFe
Battery
The balance charge connector is not connected
in the state where the battery is set to a transmitter.
A LiFe
battery is
removed
from T14SG.
Balance charge
is carried out from the charger only for LiFe.
2P connector is
removed from T14SG.
The battery state inside T14SG
NiMH HT5F1800B
LiFe FT2F2100B/1700B
LiFe SPACER
*About low battery voltage, all the models included in one
transmitter are changed in common. It cannot set to different
voltage for every model. Moreover, data reset is not carried
out.