Digitus DN-13020 Manuel D’Utilisation
8
9. If the wireless network is secured by WPA-PSK or WPA2-PSK,
the key formats, shared key and encryption must be set correctly.
10. Click Submit to save your settings. And the server will reboot.
11. You have now finished the procedure of setting the wireless parameters.
11. You have now finished the procedure of setting the wireless parameters.
After properly configuring the wireless parameters, you can remove the network
cable and reboot the server. The server will then connect to your wireless
network. It will detect if a network cable is plugged-in or not. If a network cable is
plugged-in, it will always connect to the network through the network cable.
Otherwise it will always connect to the network through wireless module. Once
the server connects to the network, either by network cable or by wireless
module, all operations to use USB device server are exactly the same.
cable and reboot the server. The server will then connect to your wireless
network. It will detect if a network cable is plugged-in or not. If a network cable is
plugged-in, it will always connect to the network through the network cable.
Otherwise it will always connect to the network through wireless module. Once
the server connects to the network, either by network cable or by wireless
module, all operations to use USB device server are exactly the same.