Friedland Motion switch Spectra 140 ° White IP44 L210N WHI Fiche De Données
Codes de produits
L210N WHI
Instruction Manual
BEFORE STARTING ANY
INSTALLATION WORK,
PLEASE READ CAREFULLY
List Numbers L210N BLK / L210N WHI
ENG
SAFETY
Always follow the manufacturers advice when using
power tools, steps, ladders etc. and wear suitable
protective equipment (e.g. safety goggles when
drilling holes). Before drilling holes in walls, check for
hidden electricity cables and water pipes, the use of a
cable/pipe locater maybe advisable if in doubt.
The mains supply to this product should be installed
by a competent person (e.g. a qualified electrician)
in accordance with these instructions and in
accordance with the appropriate clauses of the current
edition of the IEE wiring regulations (BS7671).
DANGER - 240 VOLTS. To prevent the risk of
electrocution, always turn off the mains electricity
supply before commencing any work on the installation
or opening the detector.
It is essential that all connections are made as
instructed, that cables are not stressed and that
terminals are fully tightened.
TOOLS NEEDED
●
Drill and 6mm Masonry Drill Bit
●
Wire cutters and Wire Strippers
●
No.2 Philips Screwdriver
●
Terminal or Electricians Screwdriver
●
Large Bladed Screwdriver
1
L210N 6017 ENG 1-10 8/15/06 10:09 AM Page 3