Superrollo Professional Universal belt winder GW60 including sun sensor SR10060 SR10060 Fiche De Données
Codes de produits
SR10060
83
i
EN
i
5.
Changing and correcting the end points
Move the roller shutters to the
centre position and re-adjust the
respective end point.
centre position and re-adjust the
respective end point.
NOTE
You may have to readjust the end
points after a period of time as the
belt may elongate during operation.
You may have to readjust the end
points after a period of time as the
belt may elongate during operation.
12. Adjusting the end points
13. Manual operation
Manual operation is possible in
any mode and has priority over the
programmed automatic functions.
any mode and has priority over the
programmed automatic functions.
NOTE
◆
The end point settings are main-
tained during manual opera-
tion.
tained during manual opera-
tion.
◆
You can operate the belt winder
max. 5 minutes at maximum
load. Afterwards, allow the
drive to cool for approx. 30
minutes.
max. 5 minutes at maximum
load. Afterwards, allow the
drive to cool for approx. 30
minutes.
Operating
buttons
or