Graupner Hendheld RC 2.4 GHz No. of channels: 12 33124 Fiche De Données
Codes de produits
33124
181
Detail program description - Control adjust
Basic programming procedure
Select the mixer you want by using the arrow keys
1.
on the left or right touch pad.
Tap the center
Tap the center
2.
SET
key on the right touch pad. The
input fi eld on the line marked "fr" at the lower edge of
the screen is now shown highlighted.
Use the arrow keys on the right touch pad to select
the screen is now shown highlighted.
Use the arrow keys on the right touch pad to select
3.
the "fr" mixer input.
Tap the center
Tap the center
4.
SET
key on the right touch pad; using
the arrow key
on the left or right touch pad, switch
to the column marked "to" on the lower edge of the
screen and then tap the center
screen and then tap the center
SET
key on the right
touch pad once again.
The input fi eld "to" is shown highlighted.
Use the arrow keys on the right touch pad to select
The input fi eld "to" is shown highlighted.
Use the arrow keys on the right touch pad to select
5.
the "to" mixer output.
Tap the center
Tap the center
6.
SET
key on the right touch pad.
Optionally, use the arrow key
on the left or right
touch pad to switch to the column marked "ty" on
the lower edge of the screen, in order to include
the trim of the respective joystick in the mixer input
signal ("Tr" for trim) and/or to add series switching for
mixers …
… and/or use the arrow key
the lower edge of the screen, in order to include
the trim of the respective joystick in the mixer input
signal ("Tr" for trim) and/or to add series switching for
mixers …
… and/or use the arrow key
on the left or right
touch pad to switch to the column marked with the
switch icon
switch icon
on the lower edge of the screen.
Here, tap the center
SET
key on the right touch
pad once again and assign a switch, following the
description given in the section "Assigning transmitter
controls, switches and control switches" (page 52).
Using the arrow key
description given in the section "Assigning transmitter
controls, switches and control switches" (page 52).
Using the arrow key
7.
on the left or right touch pad,
switch to the column and then tap the center
SET
key on the right touch pad.
to the menu option …
MIX active/phase
Fl. phase timers
Wing mixers
Wing mixers
MIX-only channel
Dual mixer
Dual mixer
Free mixers
MIX active/phase
Fl. phase timers
Helicopter mixer
Helicopter mixer
MIX-only channel
Dual mixer
Dual mixer
Free mixers
… on the multi-function list. Briefl y tap the center
SET
key on the right touch pad to open this menu option.
Free mixers
Freely-programmable linear and curve mixers
Regardless of the model type you have selected, each
of the 24 model memory slots will offer you eight linear
mixers (M1 … M8) …
of the 24 model memory slots will offer you eight linear
mixers (M1 … M8) …
Typ
fr
zu
M1
M2
M3
M2
M3
??
??
??
??
M4
M5
M5
??
??
??
??
??
??
… and 4 curve mixers (K9 … K12), which also offer you
the option of setting non-linear control characteristics:
the option of setting non-linear control characteristics:
Typ
fr
zu
M8
C9
C10
C9
C10
??
??
??
??
C11
C12
C12
??
??
??
??
??
??
In addition, the "MIX active/phase" menu (page 192)
enables you to enable and disable particular mixers
separately for specifi c fl ight phases. On the "Free
mixers" menu, the blocked mixers are then
suppressed in the corresponding fl ight phase. If
you are hunting for a mixer that is not shown, you
should therefore switch to the appropriate fl ight
phase!
In this fi rst section, however, we will concentrate on how
to program the fi rst screen page of the "free mixers". We
will then move on to the method of programming mixer
ratios, both for linear mixers and curve mixers, as found
on the second screen page of this menu.
enables you to enable and disable particular mixers
separately for specifi c fl ight phases. On the "Free
mixers" menu, the blocked mixers are then
suppressed in the corresponding fl ight phase. If
you are hunting for a mixer that is not shown, you
should therefore switch to the appropriate fl ight
phase!
In this fi rst section, however, we will concentrate on how
to program the fi rst screen page of the "free mixers". We
will then move on to the method of programming mixer
ratios, both for linear mixers and curve mixers, as found
on the second screen page of this menu.