Hitachi hard disk 0J11285 500 GB 2.5 " 8 MB 0J11285 Fiche De Données
Codes de produits
0J11285
Z5K500 OEM Specifications
30
6.4.3
Connector description
Connector specifications are included in section 7.2, "Interface connector".
6.4.4
Mounting orientation
The hard disk drive will operate in all axes (six directions) and will stay within the specified error rates
when tilted ± 5 degrees from these positions.
when tilted ± 5 degrees from these positions.
Performance and error rate will stay within specification limits if the hard disk drive is operated in the other
permissible orientations from which it was formatted. Thus a hard disk drive formatted in a horizontal
orientation will be able to run vertically and vice versa.
permissible orientations from which it was formatted. Thus a hard disk drive formatted in a horizontal
orientation will be able to run vertically and vice versa.
The recommended mounting screw torque is 0.3 ± 0.05 Nm.
The recommended mounting screw depth is 3.0 ± 0.3 mm for bottom and 3.5 ± 0.5 mm for horizontal
mounting.
mounting.
The user is responsible for using the appropriate screws or equivalent mounting hardware to mount the
hard disk drive securely enough to prevent excessive motion or vibration at seek operation or spindle
rotation.
hard disk drive securely enough to prevent excessive motion or vibration at seek operation or spindle
rotation.
6.4.5
Load/unload mechanism
The head load/unload mechanism is provided to protect the disk data during shipping, movement, or
storage. Upon power down, a head unload mechanism secures the heads at the unload position. See
section 6.5.4, "Non-operating shock" for additional details.
storage. Upon power down, a head unload mechanism secures the heads at the unload position. See
section 6.5.4, "Non-operating shock" for additional details.