ONKYO C-7030 C-7030B Fiche De Données

En-

14

With  (Remote Interactive) you can control the 
C-7030 together with your other -compatible Onkyo 
AV components. With some Onkyo AV receivers you 
can use one remote controller to control all your Onkyo 
components and use the following special  functions:

Direct Change
If your C-7030 is connected to an -compatible Onkyo 
hi-fi amp or AV receiver, when you start playback on the 
C-7030, the AV receiver will select the C-7030 as the 
input source.

Remote Control Operation
You can control the C-7030 by using your Onkyo ampli-
fier’s remote controller. See the amplifier’s instruction 
manual for details.

To use the  functions, you need to connect one of the 
C-7030’s connectors to an connector on another 
AV component in your system by using the supplied 
cable.

See the manuals supplied with your other -compati-
ble AV components for more information.

Notes:
• Use only cables for connections.
• The C-7030 has two connectors. You can connect 

either one to your Onkyo hi-fi amp or AV receiver. The 
other connector is for connecting additional -com-
patible components.

• Connect the C-7030’s connector only to Onkyo 

AV components. Connecting to other manufacturer’s 
AV components may cause them to malfunction.

• Some Onkyo -compatible AV components may not 

support the special functions described here.

Connections

L

R

RCA/phono audio cable (supplied)

 cable (supplied)

Coaxial cable (not supplied)

Onkyo Hi-fi amp, AV receiver

Coaxial IN

CD



To use  you must make an analog audio connection 
(RCA/phono) between the C-7030 and your other Onkyo 
component even if they are connected digitally.

