Samsung BN59-01012A Fiche De Données

The machine is not receiving power.

Connect the machine to the electricity supply first. If the machine has a 

 (Power/

Wakeup) button on the control, press it. 

The machine is not selected as the default 
machine.

Select your machine as your default machine in Windows.

Check the machine for the following:

•

The cover is not closed. Close the cover.

•

Paper is jammed. Clear the paper jam (see "Clearing paper jams" on page 96).

•

No paper is loaded. Load paper (see "Loading paper in the tray" on page 38).

•

The toner cartridge is not installed. Install the toner cartridge (see "Replacing the toner cartridge" on page 76).

•

Make sure the protect cover and sheets are removed from the toner cartridge (see "Replacing the toner cartridge" on page 76).

If a system error occurs, contact your service representative.

The connection cable between the computer and 
the machine is not connected properly.

Disconnect the machine cable and reconnect it (see "Rear view" on page 20).

The connection cable between the computer and 
the machine is defective.

If possible, attach the cable to another computer that is working properly and print a job. 
You can also try using a different machine cable.

The port setting is incorrect.

Check the Windows printer settings to make sure that the print job is sent to the correct 
port. If the computer has more than one port, make sure that the machine is attached to 
the correct one.