Renkforce Wireless Surveillance Kit808578 Resolution (TVL) 420 TVL 808578 Fiche De Données

Function „Quality“
Here, you can set the resolution (VGA = 640 x 480 or QVGA = 320 x 240 pixels) in which the recordings on

the memory card are to take place.
Proceed as follows:
•  Use the buttons „4“ and „6“ to choose the submenu „Quality“ and then push the button „PLAY/ENTER“ 

on the DVR or the button „

“ on the IR remote control.

•  Use the buttons „4“ and „6“ to switch between „VGA“ (= 640 x 480 pixels) and „QVGA“ (= 320 x 240

pixels).

•  Confirm selection with the button „PLAY/ENTER“ on the DVR or the button „

“ on the IR remote cont-

rol.

•  Push the button „MENU/ESC“ on the DVR or the button „MENU“ on the IR remote control repeatedly to

return to the respective previous menu or leave the OSD menu.

Function „Volume“
In this function, the volume for each radio camera/channel can be set separately. This may be required 

depending on the assembly position of the radio camera or the microphone to keep the playback volume 

about at the same height.
Proceed as follows:
•  Use the buttons „4“ and „6“ to choose the submenu „Volume“ and then push the button „PLAY/ENTER“ 

on the DVR or the button „

“ on the IR remote control.

•  Use the buttons „4“ and „6“ to pick one of the four channels now.
•  Push the button „PLAY/ENTER“ on the DVR or „

“ on the IR remote control to display the camera 

image of the respective channel on the connected screen/TV.

•  Set the desired volume with the buttons „4“ and „6“.
•  Push the button „MENU/ESC“ on the DVR or the button „MENU“ on the IR remote control repeatedly to

return to the respective previous menu or leave the OSD menu.