Smartwares 10.001.35 Manuel D’Utilisation
Page 32
marked "R";
Detect: During specified time range, trigger “motion detection”, “video masking”, and
“video loss” alarm signals. The corresponding alarm settings will turn on the
recording function and start test recording. The type of video file is marked “M”;
Alarm: In specified time period, trigger the external alarm signal. "Alarm Input” setting will
turn on the recording function and start test recording. The type of video file is
marked “A”.
Note: For “Alarm Function” settings, refer to Alarm Function section in Chapter 4.3.
4.2.2 Video Playback
See Chapter 3.5.2 Video Playback.
4.2.3 Video Backup
Backup DVR video files to an external storage device through this setting.
Note: Install a storage device for file backup before the operation; if the backup is terminated, files
already copied to the storage device can be played back independently.
If the backup is terminated, files already copied to the storage device can be played back
independently.
Figure 4.3 Storage Device Check
Detect: Detect storage devices connected to the unit. It could be USB flash drives or hard
drives.