Smartwares 10.001.35 Manuel D’Utilisation
Page 40
【DVR No.】To be used when multiply DVRs are controlled by one remote control, press the
address key on the remote control and input control address that matches the local
device serial number of corresponding DVR to enable remote operation
;
【Video Standard】Support PAL and NTSC formats;
【Standby Time】To set in menu the standby time from 0-60. 0 indicates no setting for standby;
【Daylight Savings Time】Check off the Daylight Savings Time, then click Settings button to show
Figures 4.13 and 4.14. Set the start and end time of Daylight Saving Time by Week or
Date.
Figure 4.13 Daylight Saving Time Settings (by Week)
Figure 4.14 Daylight Saving Time Settings (by Date)
4.4.2 Encoding Settings
Set video/audio encoding parameters, including image parameters for video files and remote
monitoring. Set encoding settings of each independent channel in the left section and parameters for
sub-coding stream in the right side section. Dual stream uses one high bit-rate stream for local HD
storage to support D1/HD1/CIF/QCIF codes and another low bit-rate stream (QCIF code) for network
transmission, while taking care of local storage and remote network transmission in the meantime.
While
the network bandwidth is limited, dual stream covers both image quality and transmission quality,
practically breaking through the network bottleneck. It flexibly picks stream format in accordance
with the available network bandwidth to achieve high definition storage and transmits back-end