Figaro 813 Gas Sensor Type Propane, butane, methane, alcohol, hydrogen (Ø x H) 17 mm x 10 mm TGS-813 Fiche De Données
Codes de produits
TGS-813
GENERAL CHARACTERISTICS
. . .
TGS #813 is a general purpose Sensor which has good sensitivity characteristics
to a wide range of gases.
. . .
TGS ß813 is designed to operate with a stabilized 5V heater supply and a
circuit voltage not exceeding 24V.
. ..The most suitable application for the TGS #813 is the detection of methane,
propane and butane which makes it an excellent Sensor for domestic gas leak
detectors.
. ..The initial stabilization
time
of the TGS 8813 is very short and the relative
and elapsed characteristics are very good over a long period of Operation.
. . .
TGS #813 has a very low sensitivity to 'noise-gases' which considerably
reduces the Problem of nuisance alarming.
The TGS 8813 is most practically employed in a circuit design which maintains
circuit voltages at fixed values under 24V (Ex.
5,6,12, or 24V are suitable)
and with the heater voltage stabilized at 5V.
These voltage ratings are very practical when determining your design specifications
because of the wide range of available components. This makes the use of the
TGS #813 an especially econimical way to design low-tost, highly reliable gas
detection circuits.
because of the wide range of available components. This makes the use of the
TGS #813 an especially econimical way to design low-tost, highly reliable gas
detection circuits.
Because of its especially high sensitivity to methane, propane and butane, the
TGS #813 is very practical for Town Gas and LPG monitoring.
TGS #813 is very practical for Town Gas and LPG monitoring.
With the added
features of a short-initial stabilization period and highly reliable elapsed
characteristics, the TGS #813 represents a new generation of gas Sensors from
Figaro.
Figaro.