Samsung M2885FW SL-M2885FW Fiche De Données

5 

 

Some menus may not appear in the display depending on options or 
models. If so, it is not applicable to your machine (see "Menu overview" on 
page 31).

 

To change the menu options:

•

Press 

 (fax) > 

 (Menu) > Fax Setup > Receiving on the control panel.

Selects the default fax receiving mode.

Specifies the number of times the machine rings before 
answering an incoming call.

Automatically prints the page number, and the date 
and time of reception at the bottom of each page of a 
received fax.

Initiates fax reception from an extension phone 
plugged into the EXT socket on the back of the 
machine. If you pick up the extension phone and hear 
fax tones, enter the code. It is preset to *9* at the 
factory.

Automatically reduces an incoming fax page to fit the 
size of the paper loaded in the machine.

Discards a specific length from the end of the received 
fax.

Blocks any unwanted faxes that you stored in the 
memory as junk fax numbers. This setting may not be 
available depending on your country.

 Enables a user to use a single telephone line to answer 
several different telephone numbers. You can set the 
machine to recognize different ring patterns for each 
number. This setting may not be available depending 
on your country (see "Receiving faxes using DRPD 
mode" on page 256).

Prints the received fax data on both sides of the paper. 
You can save the paper usage.

Resets the value or setting to the printer’s out-of-box 
state.

 Setting this option to ON provides the ability to send or 
receive a fax while the line is busy. You can select to 
send or receive a fax by either picking up the extension 
phone receiver and pressing the Start button or by 

pressing the 

(On Hook Dial) button and pressing 

the Start button.

a. M287xFD/M287xFW/M287xHN/M288xFW/M288xHW only.