Philips Limited edition epilation set HP6541/00 HP6541/00 Fiche De Données

If you need service or information or if you have a problem, please visit the Philips 

website at www.philips.com/support or contact the Philips Consumer Care Centre 

in your country. You find its phone number in the worldwide guarantee leaflet. If 

there is no Consumer Care Centre in your country, go to your local Philips dealer.

This chapter summarises the most common problems you could encounter with 

the appliance. If you are unable to solve the problem with the information below, 

contact the Consumer Care Centre in your country. 

Problem

Cause

Solution

The epilator 

does not work.

The rechargeable 

battery is empty.

Charge the epilator for 60 minutes.

The overheat 

protection has been 

activated.

When the epilator suddenly stops working 

and the charging light starts flashing red, 

the overheat protection has been 

activated. Let the epilator cool down. The 

charging light stops flashing after 30 

seconds. When the epilator has cooled 

down, switch it on again. If the charging 

light starts flashing again, the epilator has 

not yes cooled down sufficiently.

The overload 

protection is 

activated because 

something got 

caught between the 

rotating discs, or 

because you pressed 

the epilator too hard 

onto your skin.

When the overload protection has been 

activated, the charging light flashes red. 

Turn the discs with your thumb until you 

can easily remove the item that is 

blocking the rotating discs. Then switch 

on the epilator again. Do not press the 

epilator too hard onto your skin.

The precision 

epilator does 

not work.

The disposable, 

non-rechargeable 

batteries are empty 

or have been 

inserted incorrectly.

Replace the batteries or insert them 

correctly (see ‘Inserting the batteries’ in 

chapter ‘Using the precision epilator’).

13