Intel 733 MHz RH80533NZ733128 Fiche De Données
Codes de produits
RH80533NZ733128
Mobile Intel
®
Celeron
®
Processor (0.18µ) in BGA2 and Micro-PGA2 Packages
Datasheet
283654-003
30
Table 16. CMOS and Open-drain Signal Groups AC Specifications
1, 2
T
J
= 0°C to 100°C; T
J
= 5°C to 100°C for Vcc = 1.15V; V
CC
= 1.10V ±80 mV or 1.15V ±80 mV or 1.35V ±100
mV or 1.60V ±115; V
CCT
= 1.50V ±115 mV
Symbol Parameter
Min Max Unit
Figure Notes
T14
1.5V Input Pulse Width, except PWRGOOD and
LINT[1:0]
LINT[1:0]
Active
and
Inactive states
T14B
LINT[1:0] Input Pulse Width
6
BCLKs Figure 7 Note 3
T15
PWRGOOD Inactive Pulse Width
10
BCLKs Figure 10 Notes 4, 5
NOTES:
1.
All AC timings for CMOS and Open-drain signals are referenced to the BCLK rising edge at 1.25V. All
CMOS and Open-drain signals are referenced at 0.75V.
CMOS and Open-drain signals are referenced at 0.75V.
2.
Minimum output pulse width on CMOS outputs is 2 BCLKs.
3.
This specification only applies when the APIC is enabled and the LINT1 or LINT0 signal is configured as
an edge triggered interrupt with fixed delivery, otherwise specification T14 applies.
an edge triggered interrupt with fixed delivery, otherwise specification T14 applies.
4.
When driven inactive, or after V
CC
, V
CCT
and BCLK become stable. PWRGOOD must remain below V
IL25,max
from Table 12 until all the voltage planes meet the voltage tolerance specifications in Table 9 and BCLK
has met the BCLK AC specifications in Table 13 for at least 10 clock cycles. PWRGOOD must rise glitch-
free and monotonically to 2.5V.
has met the BCLK AC specifications in Table 13 for at least 10 clock cycles. PWRGOOD must rise glitch-
free and monotonically to 2.5V.
5.
If the BCLK Settling Time specification (T60) can be guaranteed at power-on reset then the PWRGOOD
Inactive Pulse Width specification (T15) is waived and BCLK may start after PWRGOOD is asserted.
PWRGOOD must still remain below V
Inactive Pulse Width specification (T15) is waived and BCLK may start after PWRGOOD is asserted.
PWRGOOD must still remain below V
IL25,max
until all the voltage planes meet the voltage tolerance
specifications.