Fujitsu RDX 3.5" S26361-F3750-L5 Fiche De Données

Codes de produits
S26361-F3750-L5
Page de 3
Data Sheet
 FUJITSU PRIMERGY RDX USB3.0 Backup Device 
Page 2 / 3
www.fujitsu.com/fts
Technical details
Backup and archiving solutions
Capacity
Depending of used RDX cartridge. 320, 500 GB, 1 and 2 TB are available - all RDX cartridge capacities are supported!
Transfer rate
Up to 100MB/s,
The maximum transfer rate can only be achieved if this RDX drive is connected to a USB 3.0 system port a USB 3.0 
adapter card via a USB 3.0 cable
Recording format
RDX
Interface
USB 3.0 B
Device load / unload cycles
10,000
Cartridge load / unload cycles
5,000
Backwards compatible
RDX cartridge – all capacities
Data cassette
RDX cartridge
Delivery and Media Link
http://docs.ts.fujitsu.com/dl.aspx?id=2201cb10-c310-461e-9920-0f1effa5ab03
Dimensions / Weight
Form factor
3.5-inch or 5.25-inch internal
Dimensions (W x D x H)
101.6 mm x 159.4 mm x 41.4 mm (3.5-inch)
146 mm x 171.9 mm x 41.4 mm (5.25-inch)
Weight
0.635 kg (3.5-inch) 
0.408 kg (5.25-inch)
Environmental
Operating ambient temperature
10 - 40 °C
Operating relative humidity
20 - 80 %
Temperature note
Storage ambient temperature: -40 - 65°C
Storage/transport relative humidty: 10 - 90 %
Electrical values
Rated current max.
12V: 1,4 A
5V: 1,6 A 
Compliance
Compliance notes
According to the corresponding system
Compliance link
http://globalsp.ts.fujitsu.com/sites/certificates