Laney Amplification Car Speaker CX10 Fascicule

Series

Thank you for purchasing a CX series loudspeaker.
In order to take full advantage of it and enjoy long and trouble-free performance, please read this owner's manual
carefully, and keep it in a safe place for future reference.

1) Read Instructions carefully before installing or operating this product.

2) Retain these instructions

3) Comply with warnings: All warnings and instructions for these products should be adhered to.

4) Unpacking: Please retain the packing carton and liners in case the unit should need to be returned at any time.

5) Amplifier connection. In order to avoid damage, it is advisable to establish and follow a pattern for turning on and off
your sound system.

With all system parts connected, turn on source equipment, tape decks, cd players, mixers, effects processors etc.
BEFORE turning on your power amplifier. Many products have large transient surges at turn on and off which can cause
damage to your speakers.

By turning on your power amplifier LAST and making sure its level control are set to minimum any transients from other
equipment will not reach your loudspeakers.

Wait until all system parts have stabilised usually a couple of seconds.

Similarly when turning off your system always turn down the level controls on your power amplifier and then turn off its
power before turning off other equipment.

6) Cables- never use shielded or microphone cable for any speaker connections as this will not be substantial enough to
handle the amplifier load and could cause damage to your complete system.

7) Rigging or suspended mounting. The rigging or suspended mounting of these speakers can expose members of the
public to serious health risks or even death. Under no circumstances attempt to rig, suspend or otherwise mount this
system unless you are fully qualified and certified to do so by relevant local, state and national authorities. All
relevant safety regulations must be followed. If you are not properly qualified or do not know of pertinent
regulations, consult qualified personnel for advice and assistance.

When mounted on a propriety tripod pole stand ensure the system is fully stable and can not fall over. We do not
recommend poles stands to be used higher than 1.5 metres, without extra support.

8) Caution: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use
care with placement and operation to avoid exposure to excessive levels that can cause permanent hearing damage.

9) Servicing: The user should not attempt to service these products. Refer all servicing to qualified service personnel.

General Specifications:

Power Rating RMS

Program Power Rating

Impedance

Frequency Range

Size W*D*H

Pole Stand Fitting Dia

Weight Kg

CX10

150W

300W

70Hz>18KHz

350*310*520

35mm

9.4Kg

CX12

200W

400W

60Hz>18Khz

410*330*620

35mm

15Kg

CX15

250W

500W

50Hz>18Khz

500*360*700

35mm

20Kg

Laney

www.laney.co.uk

User Manual

Revision 1.0

Features and Specifications Subject To Change Without Notice

cx10,cx12,cx15