CNet Technology Internet Broadband Gateway CNIG904S Manuel D’Utilisation

CNet Technology Inc                                                                                                                       Configuration

9

The Broadband Router contains a HTTP server. This enables you to connect to it, and config-
ure it, using your Web Browser.

Most Browsers should work, provided they support HTML tables and forms.

Before attempting to configure the Broadband Router, please ensure that:
•  Your PC can establish a physical connection to the Broadband Router. The PC and the

Broadband Router must be directly connected (using one of the Switching Hub ports on the
Broadband Router) or on the same LAN segment.

•  The Broadband Router must be installed and powered ON.
•  If the Broadband Router's default IP Address (192.168.0.1) is already used by another

device, the other device must be turned OFF until the Broadband Router is allocated a new
IP Address during configuration.

To establish a connection from your PC to the device:
1.  After installing the Broadband Router in your LAN, start your PC. If your PC is already

running, restart it.

2.  Start your WEB browser.
3.  In the Address box, enter "HTTP://" and the IP Address of the Broadband Router, as in the

following example, which uses the Broadband Router’s default IP Address:

HTTP://192.168.0.1

4.  If you have assigned a password to the Broadband Router you will be prompted for the

password, as shown below. (If no password has been set, this dialog will not appear.)
•  Leave the "User Name" blank.
•  Enter the password for this device, if one has been set.

5.  You should then see the LAN screen.

See the following section for the available options and configuration screens.