CNet Technology Internet Broadband Gateway CNIG904S Manuel D’Utilisation

CNet Technology Inc

4

Please take a few minutes to familiarize yourself with the Broadband Router.

There are 2 LEDs on the top of the unit. The "DATA STATUS LAN" LED has 2 colors -
Green and Orange. Operation of these LEDs is as follows:

On (Green) - Normal start up/power on sequence, or idle.

The Data/Status LED will flash under the following conditions:
•  Flashing (Green) – The Data/Status LED will flash when

data is transmitted or received through the LAN ports.

•  Flashing (Orange, Green, Orange,…) – Hardware error.

Contact your dealer for technical support.

On - Normal start up (power ON) sequence or idle.

Flashing – The Data LED will flash when data is transmitted or
received through the WAN port.

Reset
button

 10/100 BaseT
LAN Connectors

Power

Input

WAN

Uplink

RESET

WAN
 port

DIP

switches

LAN Port
  LEDS

4

3

2

1

WAN port
    LED

1 2 3

4

Link/

Act

100

LAN

Uplink
  port

Refer to the following table for DIP switch operation.

On -  The Router is successfully connected to a device through the
corresponding port (1, 2, 3, or 4).

Flashing - Transmitting or receiving data over that port.

On - LAN port connection is using a 100BaseT connection.

Off - Port is unused or using 10BaseT connection.

Use standard LAN cables (RJ45 connectors) to connect your PCs ot
these ports. Both 10BaseT and 100BaseT connections can be used
simultaneously.

Use the "Uplink" port ONLY to connect (via a normal LAN cable)
to a normal port on another hub.