VIVOTEK Vivotek Network Router ND4801 Manuel D’Utilisation

 

 

5. On the 

Disk page, Select disk drives by clicking the checkboxes in front of disk drives.Select 

Build single disk, Build RAID0, RAID1, RAID5, RAID10 or other option from the Disk 

configuration pull-down menu. Click Apply and wait for a few minutes for the configuration 

to take effect.   

Refer to the description available with every disk volume type on the screen, such as those 

for RAID0, RAID1, RAID5, or RAID10.  

6. On the Camera page, all cameras connected through the local network should appear on 

a 

Camera list after a brief search. You can manually assign IP addresses by clicking on 

the cameras' address field. You can also select the "Assign IP addresses to all cameras" 

checkbox and let NVR assign IPs to cameras. 

Click 

Next to end the initial setup. Make sure you have the cameras' access credentials in order 

to make individual changes. It is also highly recommended to 

synchronize cameras' time 

with that of the NVR system. Click the checkbox below for an automated synchronization.