Leica CM1950 Manuel D’Utilisation
25
Leica CM1950 – Cryostat
6.5
Installing Accessories/Inserting Chamber Accessories
6.5.1 Installing the Adjustable Footrest (Optional)
•
To install the optional footrest, unscrew the
screws (1) using the No. 3 Allen key provided.
screws (1) using the No. 3 Allen key provided.
1
•
Attach the holders (2) for the footrest on the
left and right to the front wall of the housing.
To do so, use the Allen screws you used earli-
er. Ensure that the screws are tight.
left and right to the front wall of the housing.
To do so, use the Allen screws you used earli-
er. Ensure that the screws are tight.
•
Hook the footrest (3) into the installed holder
according to individual requirements (height).
according to individual requirements (height).
•
Once installed, the user can adjust the height
of the footrest at any time by relocating it (3)
to the desired height on both sides in the
holder (2).
of the footrest at any time by relocating it (3)
to the desired height on both sides in the
holder (2).
2
3
Fig. 20
6.
Installation
When installing the holder (2), ensure
that the cutout faces downwards so that
the support (3) can be hooked in.
that the cutout faces downwards so that
the support (3) can be hooked in.