BMW 2015 Z4 sDrive35is Manuel Du Propriétaire

2.

"Vehicle status"

3.

"Engine oil level"

▷

"Engine oil level OK"

▷

"Measurement not possible at this time."

▷

"Measuring engine oil level..."
Duration with the engine running: ap‐
prox. 3 minutes.
Duration while driving: approx. 5 minutes.
If engine oil was added, it may take up to
30 minutes to obtain an oil level reading.

▷

"Engine oil level below minimum. Add 1
quart!"
Add a maximum of 1 US quart/1 liter of en‐
gine oil at the next opportunity, refer also
to Adding engine oil below.

▷

"Engine oil level too high! Have this
checked."

Too much engine oil
Have the vehicle checked immedi‐

ately; otherwise, surplus oil can lead to en‐
gine damage.◀

▷

"Measurement inactive. Have this
checked." Do not add engine oil. It is possi‐
ble to continue driving. Note the newly cal‐
culated remaining mileage until the next oil
service, refer to page 

. Have the system

checked as soon as possible.

Depending on the engine, the filler neck is lo‐
cated in the middle, as shown, or at the front
corner in the engine cover.
Add a maximum quantity of 1 US quart/1 liter
of oil only after a corresponding message ap‐
pears on the Control Display.

Add oil promptly
Add oil within the next 125 miles/200 km;

otherwise, engine damage could result.◀

Protect children
Keep oil, grease, etc., out of reach of chil‐

dren and heed the warnings on the containers
to prevent health risks.◀

No oil additives
Oil additives may lead to engine dam‐

age.◀

Viscosity classes of engine oils
When selecting an engine oil, ensure that

the engine oil belongs to one of the viscosity
classes SAE 0W-40, SAE 0W-30, SAE 5W-40,

Seite 240

240

Online Edition for Part no. 01 40 2 954 104 - II/15