Firstech, LLC. P2W900FMR Manuel D’Utilisation

  

 

18 

Turn Auto Mode off by holding down button (I) a fourth time for 2.5 seconds.  The remote will beep twice 
and the Auto Mode icon will disappear. 
 

The CompuStar systems have a built in mode that would require you to keep your remote separate from 
your key chain.  This feature also requires additional labor. Please consult your installer for more details. 
The Anti Jacking mode allows you to safely disable your vehicle once a thief has driven off with your 
property.   If you are car jacked and still have your remote, you can panic the system by holding button IV 
down for 4 seconds.  The siren will sound for 30 seconds and the motor of the vehicle will shut down.  

 
IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any 
operations.  Remote coding is typically done at your local CompuStar dealer. 

 
STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the 
Acc & On positions) five times within 10 seconds.  The vehicle’s parking lights will flash once with the 
successful completion of this step. 
 
STEP 2: Within a 5 second period after cycling the ignition for the 5

th

 time, press button (I) on two-way 

remotes or the (lock) button on one-way remotes for 0.5 seconds.  The parking lights will flash once to 
confirm the transmitter has been coded. 

 
Exiting Programming: Programming is a timed sequence.  The 
parking lights will flash twice signaling the end of programming mode. 
 
Programming Multiple Remotes: After the confirmation flash given in 
step 2, code additional remotes by pressing button (I) on two-way 
remotes or the (lock) button on one-way remotes.  The parking lights 
will flash once confirming each additional remote.  All systems (except 
the P2WSSR), can recognize up to three remotes. 
 
 

 
STEP 1: Remove the AA battery from the remote. 
 
STEP 2: Activate Valet/Programming mode by manually turning the ignition on and off (between Acc & 
On) five times within 10 seconds.  The parking lights will flash once with successful completion of this 
step. 
 
STEP 3: Within a 10 second period after cycling the ignition for the 5

th

 time, insert the AA battery into the 

remote.  The parking lights will flash once to confirm this step. 
 
STEP 4: Wait several seconds for the parking lights to flash twice and the remote LCD to activate.  The 
transmitter has now been coded. 
 
Programming Multiple Remotes: After the confirmation flash given in step 3, program another remote 
by pressing the (lock) button for 0.5 seconds.  The parking lights will flash once confirming that the