Code Alarm CATX500 Fascicule

1)

Enter the vehicle, and turn the ignition switch to the ON position.

2)

Press and release the Programming button switch 3 times.

3)

Press and hold the LOCK button of the transmitter you wish to program.

4)

The lights will flash 1 time, indicating that the system is accepting the
programming of channel #1 which is lock.

"Repeat step 3 for each transmitter you wish to program"

5)

Press and release the valet push button switch 1 time to advance to
channel 2.

6)

Press and hold the UNLOCK button of the transmitter you wish to
program.

7)

The lights will flash 1 time, indicating that the system is accepting the
programming of channel #2 which is unlock.

"Repeat step 6 for each transmitter you wish to program"

8)

Press and release the valet push button switch 1 time to advance to
channel 3.

9)

Press and hold the TRUNK button of the transmitter you wish to
program.

10) The lights will flash 1 time, indicating that the system is accepting the

programming of channel #3 which is trunk.

"Repeat step 9 for each transmitter you wish to program"

11) Press and release the valet push button switch 1 time to advance to

channel 4.

12) Press and hold the STAR button of the transmitter you wish to program.

13) The lights will flash 1 time, indicating that the system is accepting the

programming of channel #4 which is remote start.

"Repeat step 12 for each transmitter you wish to program"