ConvaTec USA 900EC Manuel D’Utilisation

5.0 

 
 

PROBLEM 

 

 

CAUSE 

 

 

SOLUTION

 

No functions operate   

No power to unit 

 

Check power cord

 

 

 

 

 

 

 

 

 

Is it plugged into receptacle?

 

Green Power-on light  

Electrical power cord not 

 

does not glow  

 

properly plugged into   

Check cord for breaks.

 

 

 

 

 

control module

 

Power cord plugged   

 

 

 

 

Check for power to receptacle

 

in but no functions

 

operate 

 

 

Bad handset   

 

Replace handset

 

 

 

 

 

Bad control module   

Replace control module

 

 

 

 

 

 
6.0 

 
 

The chair is subject to wear and tear resulting from the place, length, and other conditions of use.  

 

For longer use, periodically inspect all parts and have them replaced as needed.

 

 

• 

check the cushions for rips or tears

 

 

• 

check operation of the brake pedals

 

 

• 

check set screws on brake pedals

 

 

• 

check all bolts and nuts for tightness

 

Your maintenance department should inspect the chair periodically ( at least every 6 months) for  

 

proper operation.

 

Every six months minimum:

 

 

lubricate all slides and pivot points with FDA approved light grease

 

 

• 

check all electrical wiring for any frays, kinks and or deterioration

 

 

• 

ensure that lock and steer castor operate properly

 
 

Any discrepancies noted during inspection must be corrected before using chair.

 

CLEANING

 

Any ?uid spilled on the seat, back or leg cushions should be removed as quickly as possible.

 

All painted metal surfaces should be wiped with a clean, soft cloth weekly.

 

All moving parts should be lubricated occasionally with light approved oils to help insure quiet,    

 

dependable operation.

 

Before using any cleaning product, test it on the underside of the chair seat. Never use any vola  

 

tile ?uid (thinner, gasoline, etc) that could cause discoloration or deterioration.

 

Use mild soap and water or a nonabrasive hospital grade detergent disinfectant to clean the chair.

 

First, wet a cloth with the cleaning product and wring it dry, then gently wipe off the chair.