M-S Cash Drawer A794 Manuel D’Utilisation
Chapter 6: Programming Information
A794 Owner’s Guide
December 1999
88
Select or Cancel 90 Degree Clockwise Rotated Print
ASCII
ESC V n
Hexadecimal
1B 56 n
Decimal
27 86 n
Value of n:
0 = Cancel
1 = Set
1 = Set
Default:
0 (Cancel)
Rotates characters 90 degrees clockwise. The command remains in effect until the
printer is reset or until a Clear Printer (0x10) or Rotated Print (1B 12) command is
received. See Summary of Rotated Printing in this document.
printer is reset or until a Clear Printer (0x10) or Rotated Print (1B 12) command is
received. See Summary of Rotated Printing in this document.
Select or Cancel Upside Down Print Mode
ASCII
ESC { n
Hexadecimal
1B 7B n
Decimal
27 123 n
Value of n:
0 = Cancel
1 = Set
1 = Set
Default:
0 (Cancel)
Prints upside-down characters. The command may be combined with Clockwise
Rotated print (1B 56) or Counter Clockwise Rotated print (1B 12). The character order is
inverted in the buffer so text is readable. Only bit 0 is used. Bits 1-7 are not used. See
Summary of Rotated Printing in this document for more information.
Rotated print (1B 56) or Counter Clockwise Rotated print (1B 12). The character order is
inverted in the buffer so text is readable. Only bit 0 is used. Bits 1-7 are not used. See
Summary of Rotated Printing in this document for more information.
Exceptions
The command is valid only at the beginning of a line.
It cannot be used with right side up characters on the same line.
Select Character Size
ASCII
GS ! n
Hexadecimal
1D 21 n
Decimal
29 33 n
Value of n:
1-8 = vertical number of times normal font
1-8 = horizontal number of times normal font
1-8 = horizontal number of times normal font
Range of n:
00-07, 10-17, ...70-77
Default of n:
11 hexadecimal
Selects the character height using bits 0 to 2 and selects the character width using bits 4
to 6, as follows:
to 6, as follows: