BMW 520D Manuel D’Utilisation

Page de 248
Mutual aid
204
Only attach the towbar to the towing 
eyes. Attaching the towbar to other parts 
of the car can result in damage.
<
With towrope
Ensure that the towrope is taut when the towing 
vehicle moves off.
For towing, use nylon ropes or tapes, as 
these will help to avoid sudden tensile 
loads. Only attach the towrope to the towing 
eyes. Attaching the towrope to other parts of 
the car can result in damage.
<
With breakdown truck
Have the BMW transported by a breakdown 
truck with a hoisting frame or hoisted onto a 
loading platform.
With breakdown truck 525xi, 530xi, 
530xd
Do not tow away the BMW with just the 
front or rear axle raised off the ground, 
otherwise the wheels could lock and the trans-
fer box be damaged.
<
Always have the BMW hoisted onto a loading 
platform for transporting.
Tow-starting
If the electrical system fails, do not 
attempt to tow-start or tow away the car. 
The electrical steering-wheel lock cannot be 
disengaged and the car is not steerable. Start-
ing with a flat battery, see page
.
<
Do not tow-start cars with automatic 
transmission. Cars equipped with a cata-
lytic converter should only be tow-started if the 
engine is cold. It is preferable to start the engine 
using jump leads, see page
<
1.
Switch on the hazard warning flashers, 
complying with local regulations.
2.
Switch on the ignition, see page
.
3.
Engage 3rd gear. Cars with SMG, see 
below.
4.
Keep the clutch depressed while tow-start-
ing the car, then gradually release the 
clutch. Press the clutch down fully again as 
soon as the engine has started.
5.
Halt in a suitable place, remove the towbar 
or towrope and switch off the hazard warn-
ing flashers.
6.
Have the car checked.
Cars with Sequential Manual Gearbox SMG:
1.
Tow-start in selector lever position N.
2.
Select the sequential mode. The correct 
gear is engaged and the clutch operated 
automatically.
Do not activate Hill Descent Control HDC 
on the 525xi, 530xi, 530xd when tow-
starting, see page
.
<
Online Edition for Part-No. 01 41 0 159 725 © 09/05 BMW AG