Multiquip Pet Fence mtr-40hs Manuel D’Utilisation

2.

Set  the engine ON/OFF switch (Figure 7) to the "ON"
position (start).

3. Move the throttle lever to the "IDLE" position (Figure 8).

4. In cold weather, start the unit with choke lever "Fully Closed"

(Figure 9).  In warm weather or when the engine is warm, the
unit can be started with choke halfway or completely open.

This section is intended to assist the
operator with the 

initial start-up of the

MTR-40HS rammer. It is extremely
important that this section be 

carefully before attempting to use the
rammer in the field.

DO NOT use your rammer until this section is thoroughly
understood.

Failure to understand the

procedures of the MTR-40HS rammer could
result in severe damage to the rammer or
personal injury.

See Figure 1 (Page 13) for the location of any control referenced
in this manual.

The following steps outline the procedure for starting the engine:

1.

Open the  

fuel shut- off valve by moving the fuel  cock

lever to the 

open position (Figure 6).