West Bend SSP4BL - Smoothie Maker, Splash Manuel Du Propriétaire

Before assembling your Smoothie Splash

™

 wash all parts, 

base in warm, soapy water, rinse thoroughly and dry.  Unscrew and disassemble the 
valve for cleaning (see Cleaning Your Smoothie Splash

™

 section).  To prolong the 

life of your smoothie maker, 

do not wash parts in the dishwasher. 

1.  Position the rubber gasket down onto the circular flat surface in the blade base. 

2.  Screw the blade base on the bottom of the blending jar by twisting the blade 

base counter-clockwise until tightened.  Make sure that the blade base is tightly 
fastened to the blending jar and that the rubber gasket is properly compressed 
between the blending jar and the blade base. 

3.  Lock the lid onto the top of the blending jar.  Lock the clear lid cap in the center 

of the lid or place the stir stick through the center of the lid if blending liquids or 
frozen drinks. 

4.  Place the blending jar onto the motor base so the bottom of the blade base is 

sitting flat on the motor base. 

5.  Plug in the cord.  Your smoothie maker is now ready to use. 

 
 
 

 

4