West Elm Woven Veneer Floor Lamp Instructions De Montage
woven veneer floor lamp
lampadaire en lamelles de bois tressées
lampara de enchapado tejido para piso
assembly instructions
instrucciones de montaje
Instrucciones de Ensamblaje
Page 1 of 3
2339497 - 03.30.10
I
H
F
J
E
C
D
B
A
Important Safety Instructions:
•For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does
not fi t securely into your outlet, do not force it-contact a professional electrician. Use the plug with an extension cord
only if it can be fully inserted into the cord’s socket. Never alter the plug in any way. •This instruction is provided for
your safety. It is important that they are read carefully and completely before assembling fi xture.
•This fi xture has been rated for up to (1) 100-watt TYPE A standard bulb (not included). To avoid the risk of fi re, do not
exceed the recommended wattage.
Warning:
•To reduce the risk of fi re, electrical shock or personal injury, always turn off and unplug lamp and allow it to cool prior
to replacing light bulb.
•Do not touch bulb when fi xture is turned on. Do not look directly at lit bulb.
•Keep fl ammable materials away from lit bulb
•For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does
not fi t securely into your outlet, do not force it-contact a professional electrician. Use the plug with an extension cord
only if it can be fully inserted into the cord’s socket. Never alter the plug in any way. •This instruction is provided for
your safety. It is important that they are read carefully and completely before assembling fi xture.
•This fi xture has been rated for up to (1) 100-watt TYPE A standard bulb (not included). To avoid the risk of fi re, do not
exceed the recommended wattage.
Warning:
•To reduce the risk of fi re, electrical shock or personal injury, always turn off and unplug lamp and allow it to cool prior
to replacing light bulb.
•Do not touch bulb when fi xture is turned on. Do not look directly at lit bulb.
•Keep fl ammable materials away from lit bulb
Pre-assembly:
•Remove all parts and hardware from box along with any plas
tic protective packaging.
•Do not discard any contents until after assembly is complete
to avoid accidentally discarding small parts or hardware.
•Remove all parts and hardware from box along with any plas
tic protective packaging.
•Do not discard any contents until after assembly is complete
to avoid accidentally discarding small parts or hardware.
Parts and hardware enclosed:
(1) Lamp Base (A)
(1) Pole (B)
(1) Pole (C)
(1) Pole (D)
(1) Saddle (E)
(1) Harp (F)
(1) Lamp Shade (H)
(1) Finial (I)
(1) Lamp Socket (J)
(1) Lamp Base (A)
(1) Pole (B)
(1) Pole (C)
(1) Pole (D)
(1) Saddle (E)
(1) Harp (F)
(1) Lamp Shade (H)
(1) Finial (I)
(1) Lamp Socket (J)
Assembly Instructions:
1. Screw the Pole (B) onto the Lamp Base (A).
2. Screw the Pole (C) onto the Pole (B).
3. Screw the Pole (D) onto the Pole (C).
4. Insert the Harp (F) into the Saddle (E), and lover the two
harp caps until they cover two-pronged saddle.
5. Place Shade (H) over the assembled harp, making sure the
top extends through the hole at the top of the shade.
6. Attach the Finial (I) and tighten to secure the shade.
7. Insert a bulb – Max 100 Watt (Type A) Standard (not included) into the
Lamp Socket.
1. Screw the Pole (B) onto the Lamp Base (A).
2. Screw the Pole (C) onto the Pole (B).
3. Screw the Pole (D) onto the Pole (C).
4. Insert the Harp (F) into the Saddle (E), and lover the two
harp caps until they cover two-pronged saddle.
5. Place Shade (H) over the assembled harp, making sure the
top extends through the hole at the top of the shade.
6. Attach the Finial (I) and tighten to secure the shade.
7. Insert a bulb – Max 100 Watt (Type A) Standard (not included) into the
Lamp Socket.
Care instructions:
•Clean with soft, dry cloth.
•Always avoid the use of harsh chemicals or abrasive cleaners as they
may cause damage to the lamp
•Clean with soft, dry cloth.
•Always avoid the use of harsh chemicals or abrasive cleaners as they
may cause damage to the lamp