Whirlpool W10162205A Manuel D’Utilisation

Style 4 - Electronic Oven Control (on some models)

When power is first supplied to the range, “12:00 PM” will appear 
on the display. See “Clock” section to set time of day.

If “12:00 PM” appears at any other time, a power failure has 
occurred. Press OFF/CANCEL and reset the clock if needed.

When the oven is not in use, the display shows the time of day.

When power is first supplied to the range, a flashing time will 
appear on the display. Press OFF/CANCEL to clear the display.

If a flashing time appears at any other time, a power failure has 
occurred. Press OFF/CANCEL and reset the clock if needed.

When the oven is not in use, the display shows the time of day.

When performing a timed cook function, the display will show 
either hours and minutes, or minutes and seconds.

The Start pad begins any oven function. “SET TEMP OR TIME 
OR PUSH START” will appear on the display.

The Start pad begins any oven function, except kitchen timer. If 
the Start pad is not pressed within 5 seconds after pressing a 
function pad, the “START?” or “PUSH?” indicator light will 
appear on the display (on some models).

If the Start pad is not pressed within 1 minute after pressing a 
function pad, the oven display will return to the time of day mode 
and the programmed function will be canceled.

The Off/Cancel pad stops any function except the Clock, Timer, 
Control Lock or Warm Drawer (on some models).

On some models, this is a 12-hour clock that shows a.m. and 
p.m.

Before setting, make sure the oven and Timer are off.

1. Press CLOCK. 

2. Depending on your model, press the HOUR or MIN, TEMP/

TIME or TEMP/HOUR “up” or “down” arrow pads to set the 
time of day, including a.m. or p.m.

3. Press CLOCK or START.

On some models, clock display can be turned off or on by 
pushing and holding CLOCK.

While the oven door is closed, press OVEN LIGHT to turn the 
light on and off. The oven light will come on when the oven door 
is opened. The oven light will not come on during the Self-Clean 
cycle.

Press NIGHT LIGHT to turn the light on and off.