Whirlpool SF315PEK Manuel D’Utilisation

 Before cleaning, make sure all controls are off and 

the oven and cooktop are cool. Do not use oven cleaners, bleach 
or rust removers.

Remove the burner cap from the burner base and clean 
according to “General Cleaning” section.

Clean the gas tube opening with a damp cloth.

Clean clogged burner ports with a straight pin as shown. Do 
not enlarge or distort the port. Do not use a wooden 
toothpick. If the burner needs to be adjusted, contact a 
trained repair specialist.

Replace the burner cap, making sure that alignment pins are 
properly aligned with the burner cap.

Turn on the burner. If the burner does not light, check cap 
alignment. If the burner still does not light, do not service the 
sealed burner yourself. Contact a trained repair specialist.

The right side burners can be rotated 180° to reduce the distance 
between the front and back burners. This permits better heat 
distribution when using oblong pans or griddles.

Make sure burners are cool before beginning rotation.

Remove right side grates and burner caps.

Lift burners from cooktop, as shown.

Rotate burners 180°, as shown.

Replace burners, with large hole over gas tube opening, and 
small hole over the ignitor. See “Sealed Surface Burners” 
section for burner parts descriptions. Push burner down, 
flush with cooktop.

Replace burner caps and grates.