ASUS Terminator II P TERMINATOR II T2-P (SILVE Manuel D’Utilisation

Codes de produits

TERMINATOR II T2-P (SILVE

108

Chapter 5: BIOS setup

5.4.3 Onboard Devices Configuration

OnBoard AC’97 Audio [Auto]

[Auto] allows the BIOS to detect whether you are using any audio device. If
an audio device is detected, the onboard audio controller is enabled; if no
audio device is detected, the controller is disabled.
Configuration options: [Auto] [Disabled]

OnBoard LAN [Enabled]

Allows you to enable or disable the onboard LAN controller.
Configuration options: [Enabled] [Disabled]

OnBoard LAN Boot ROM [Disabled]

Allows you to enable or disable the option ROM in the onboard LAN
controller. This item appears only when the Onboard LAN item is set to
Enabled. Configuration options: [Disabled] [Enabled]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.Configuration options:
[Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Parallel Port Address [378]

Allows you to select the Parallel Port base addresses.
Configuration options: [378] [278] [3BC] [Disabled]

Parallel Port Mode [EPP+ECP]

Allows you to select the Parallel Port mode.
Configuration options: [EPP+ECP] [Normal] [Bi-directional] [EPP] [ECP]

OnBoard AC’97 Audio

[Auto]

OnBoard LAN

[Enabled]

OnBoard LAN Boot ROM

[Disabled]

Serial Port1 Address

[3F8/IRQ4]

Parallel Port Address

[378]

Parallel Port Mode

[EPP+ECP]

EPP Version

[1.9]

ECP Mode DMA Channel

[DMA3]

Parallel Port IRQ

[IRQ7]

OnBoard Game Port

[Enabled]

Onboard MIDI Port

[Disabled]