Benq Projector W6500 Manuel D’Utilisation
13
Positioning your projector
Eng
lish
lish
Obtaining a preferred projected image size
The distance from the projector lens to the screen, the zoom setting, and the video format each factors in
the projected image size.
the projected image size.
The projector should always be placed horizontally level (like flat on a table), and positioned directly
perpendicular 90° right-angle square) to the screen. This prevents image distortion caused by angled
projections (or projecting onto angled surfaces). If the projector is mounted on a ceiling, it must be
mounted upside-down.
perpendicular 90° right-angle square) to the screen. This prevents image distortion caused by angled
projections (or projecting onto angled surfaces). If the projector is mounted on a ceiling, it must be
mounted upside-down.
If the projector is positioned further away from the screen, the projected image size increases, and the
vertical offset also increases proportionately.
vertical offset also increases proportionately.
When determining the positions of the screen and projector, you will need to account for both the
projected image size and the vertical offset dimension, which are directly proportional to the projection
distance.
projected image size and the vertical offset dimension, which are directly proportional to the projection
distance.
This projector is equipped with a movable lens. See
for details.
You can see the diagrams on pages
for the vertical offset values in the dimension tables that are
measured when the lens is shifted fully up or down.
How to determine the position of the projector for a given screen size
1. Determine the aspect ratio of your screen, 16:9 or 4:3?
2. Refer to the table and find the closest match to your screen size in the left columns labelled
2. Refer to the table and find the closest match to your screen size in the left columns labelled
. Using this value, look across this row to the right to find the corresponding average
distance from screen value in the column labelled
. This is the projection distance.
3. Decide the exact position of your projector according to the position of your screen and the adjustable
lens shift range.
. The average projection distance is 668 cm.
How to determine the recommended screen size for a given distance
This method can be used for situations where you have purchased this projector and would like to know
what screen size will fit in your room.
what screen size will fit in your room.
The maximum screen size is limited by the physical space available in your room.
1. Determine the aspect ratio of your screen, 16:9 or 4:3?
2. Measure the distance between the projector and where you want to position the screen. This is the
2. Measure the distance between the projector and where you want to position the screen. This is the
projection distance.
3. Refer to the table and find the closest match to your measurement in the average distance from screen
. Check that your measured distance is between the min and max distances
listed on either side of the average distance value.
4. Using this value, look across that row to the left to find the corresponding screen diagonal listed in that
row. That is the projected image size of the projector at that projection distance.
For example, if you have a 16:9-aspect-ratio screen and your measured projection distance was 4.5 m (450
cm), please refer to
cm), please refer to
. The closest match in
column is 455 cm. Looking across this row shows that a 100-inch screen is required.
Checking the min and max projection distance values in the columns of
indicates that the 4.5 m measured projection distance will also fit the 90 and 110-inch size
screens. The projector can be adjusted (using the zoom control) to display on these different screen sizes at
the projection distance. Be aware that these different screens have different vertical offset values.
the projection distance. Be aware that these different screens have different vertical offset values.