Benq Projector MW767 Manuel D’Utilisation

Operation

37

In the unlikely event that you connect the projector to a DVD player via the projector's 
HDMI input and the projected picture displays wrong colors, please change the color space 
to YUV.

1.

Press MENU/EXIT and then press  

/

until the SOURCE menu is highlighted.

2.

Press 

 to highlight Color Space Conversion and press 

/

 to select a suitable 

color space.

If you need to find the details on the projected picture, magnify the picture. Use the 
direction arrow keys for navigating the picture.

•

Using the remote control

1.

Press ZOOM+/ZOOM- to display the Zoom 
bar.

2.

Press ZOOM + to magnify the center of the 
picture. Press the key repeatedly until the 
picture size is suitable for your need.

3.

Use the directional arrows (

, 

, 

, 

) 

on the projector or remote control to 
navigate the picture.

4.

To restore the picture to its original size, 
press AUTO. You can also press ZOOM -. When the key is pressed again, the 
picture is further reduced until it is restored to the original size.

•

Using  the  OSD  menu

1.

Press MENU/EXIT and then press 

/

 until the DISPLAY menu is highlighted.

2.

Press

 to highlight Digital Zoom and press MODE/ENTER. The Zoom bar 

displays.

3.

Repeat steps 2-4 in the section of 

"Using the remote control"

 above. Or if you are 

using the projector control panel, continue to the following steps.

4.

Press 

 on the projector repeatedly to magnify the picture to a desired size.

5.

To navigate the picture, press MODE/ENTER to switch to the paning mode and 

press the directional arrows (

, 

, 

, 

) to navigate the picture.

6.

Use the directional arrows (

, 

, 

, 

) on the projector or remote control to 

navigate the picture.

7.

To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/
out functionality, and press AUTO to restore the picture to its original size. You can 
also press 

 repeatedly until it is restored to the original size.